www.SkyliftHardware.com Toggle Search Account Checkout Cart Order SKYLIFT Roof Risers Standard Duty Heavy Duty 18" Riser 24" Riser 30" Riser 36" Riser 3-1/2" Saddle 4" Saddle 5-1/2" Saddle 6" Saddle Custom Brackets Installation Products Order Installation Products Shipping SKYLIFT Patio Cover Plans About Us Returns Designer Series Search site Submit search Nav Menu 2 Nav Menu 3 Nav Menu 4 Nav Menu 5 Nav Menu 6 Nav Menu 7 Nav Menu 8 Home > Order SKYLIFT Roof Risers > Heavy Duty > 30" Long Riser, 6" Saddle, HEAVY DUTY, Black Our Price: $210.99 Availability: Usually Ships in 24 Hours Product Code: SK30-HD-6R Qty: Installation Overview Technical Specifications Additional Item You'll Need The SkyLift Bracket is an engineered product designed to be installed as part of a building system. It is powder coated steel, manufactured in the USA. A single SkyLift roof riser bracket package comes with a one-piece base and riser, one detachable saddle, one grade 5.3/8, 16 x 2.75 zinc plated bolt and 12 Simpson Strongtie SDS 1/4" x 3" screws. Additional item not included that you will need: one standard roof jack flashing or UPF-200 for each bracket. Installation Overview 1. Determine approximate positioning or layout of all SkyLift roof riser brackets prior to cutting any access holes. SkyLift positioning must be directly over exterior bearing walls. Take into consideration roofing material layout, rafter locations, and interior conditions. Repositioning may be necessary due to discovered conditions. 2. Remove roofing shingles/tiles carefully and save for reinstall. 3. Square and mark location. 4. SET SAW DEPTH to avoid cutting concealed items. Check wall plate and avoid obstructions or concealed items. 5. Cut access hole (minimum 3-1/2" x 6") through the roof decking/sheating, directly over the exterior bearing wall. 6. If unfavorable conditions are discovered, reposition the bracket location. (Before cutting any roof trusses or rafters, always obtain expert guidance and professionally prepared plans.) 7. Insert the SkyLift roof riser bracket through the access hole and attach to the exterior wall top plate using 4 ea. 1/4" x 3" Simpson Strong-tie SDS screws (included). DO NOT SUBSTITUTE FASTENERS. 8. Remove the SkyLift saddle and fit a standard pipe jack flashing (not included) over the SkyLift riser column. Follow manufacturer's instructions on sealing pipe jack flashing to roof. 9. Cut and fit the roofing (removed in step #3) around the pipe jack flashing and reinstall. 10. Replace the SkyLift saddle and bolt to the SkyLift riser column (3/8" bolt and nut included). 11. Seat your cross beam in the SkyLift saddle and secure with Simpson Strong-tie SDS screws (included). DO NOT SUBSTITUTE FASTENERS. See instructions included with bracket for important safety and warranty information, limitations of warranties and disclaimers. Accessories Roof Snake Perma Column Sturdi-Wall SWP46 - 4”x6” Post Our Price: $29.00 Add Our Price: $49.99 Add Share your knowledge of this product. Be the first to write a review »